GARAGE DOOR REPAIR

New Motor Installation

 Fixing and Installing New Motors

For all garage doors there will come a time when the garage motors can lose their power or they can develop problems with the wiring. Garage door motors are what provide the force which is needed to bring up and then reel it back down again. When there are problems with the garage door it tends to develop faulty sensors or remote controls. You will discover that has difficulty in rising up or in closing properly. A good deal of the time the problem isn't with the motor itself but with the wiring or position. If it happens to be a problem with the motor wiring you could try to fix the problem yourself. If it should be that the motor has failed then it is advisable to call a professional Garage Door Repairin to repair it.

With motors one of the typical problems lie with power difficulties. The motor is what supplies power to the garage door. When something occurs to halt the power then neither the motor nor the sensors of the garage will work and the garage door won't operate. The power cord itself can be faulty or there could be some malfunction to the grid. If there is a problem with loose wiring it could be that they motor will function on and off. It might turn out that there is travel limit to the garage door. If it turns out that the travel limit on the motor chain gets set too low, the garage door can continue to go down and the motor might register that it hit an obstacle and will retract. On the other hand if the motor chain is set too high, the garage door will either stay open or the motor can register that it hasn't shut and retract again.

Garage door motors must be placed in the direct centre. If the motor gets placed to the side the will tilt whenever someone tries to open it. However there are some garages which do not give enough room for a motor to be centered so that the motor has to be put to the side. In this case as time goes on the constant angling can damage the garage door. So first of all if your garage door seems to be having problems it is up to you to first of all check what could be the matter. In the case that the motor itself is damaged then you'll have to seek out a professional in the local area to repair it. However if it happens to be a problem with the wiring then you could try to repair it yourself.